Century Flight Systems, Inc. logo, Auto Pilots and Aircraft Instrumentation
enfrdees
Call Century Flight Systems: 1-800-433-5630

Find Century Flight Systems on FacebookFollow Century Flight Systems on TwitterWatch Century Flight Systems on YouTubeSubscribe to Century Flight Systems RSS Feed

Century 4000 Autopilot

Century Flight Systems understands the real world of the cockpit and knows how to transpose these conditions to reliable hardware. Now it's done in a way to allow each pilot the equipment needed to do the job.

Century 4000

As new requirements arise, functions can be added as desired to the expandable Century 4000.

To begin with, the main frame is the best designed autopilot built today fully worthy of the legacy of Century autopilots. The capture, track, soft-ride, and gust alleviation of this system are unparalleled!

Standard lateral axis features include Heading Hold, NAV intercept and track, fully coupled ILS approaches, localizer back course, VOR approach outbound intercept and track, lateral navigation steering and sequencing including en-route, terminal and approach segments with compatible GPS receivers providing ARINC 429 steering commands.

The pitch axis comes complete with trim prompting, pitch attitude hold, altitude hold, vertical speed select and hold, glideslope capture and track from above or below the glide slope and is fully capable of LPV and LNAV/VNAV approaches with compatible GPS WAAS receivers.

Automatic electric pitch trim, Flight Director or yaw damper expansions may be easily added to the Century 4000.

Options: The NSD slaved or non-slaved HSI system or other compatible HSIs may be substituted for the directional gyro. Altitude preselect and alerter is also available.



Century 4000 General Information

  Autopilot Flt. Dir. Total
Weight: 8.2 lbs..4 lbs.17.2 lbs.
Power: 4.5 amps @ 14 or 28 VDC
Panel Size: DG and AG - 3-ATI
Programmer/
Annunciator:
6.35" X 1.5 "

 



Century 4000 Specifications

Basic 2-Axis Trim Prompt

Panel Space 6.35 x 1.5 inches
Weight 8.2 lbs.
Power 1.5 amps nominal @ 14 or 28 VDC
Roll
The roll axis channel features continuous roll/nav/voltage monitors, heading hold, heading select, NAV (VOR/RNAV) /LOC/BC/LNV (GPS Steering), anticipative intercept and track, automatic soft track, auto 45-degree intercept, and all angle intercept with HSI.
 

Pitch
Pitch channel features altitude hold, attitude command, electronic altitude hold, vertical speed hold, G/S capture and track, proportional pitch trim prompting, control wheel steering, continuous pitch/GS monitors, and automatic pitch synchronization.

 

Automatic Pitch Trim Expansion

Panel Space No additional required.
Weight 2.7 lbs.
Power 1.1 amps nominal @ 14 or 28 VDC

The autotrim expansion adds automatic electrical pitch trim during autopilot operation and yoke mounted command electric pitch trim.

 

Flight Director Expansion

Panel Space No additional required.
Weight 0.4 lbs.
Power 0.3 amps @ 14 or 28 VDC
Flight Director
The flight director expansion computes the necessary roll and pitch attitudes needed to intercept and maintain headings, courses, attitudes, and altitudes. These computations are then displayed through the flight director horizon as steering commands, greatly simplifying instrument flight.
 

Yaw Damper Expansion

Panel Space No additional required.
Weight 2.8 lbs.
Power 1.9 amps @ 14 or 28 VDC

Yaw Damper
The Yaw Damper is a subsystem which enhances directional stability by reducing short-term oscillations in the yaw axis, therefore enhancing passenger comfort. In addition, it maintains coordinated flight during turns. The yaw damper is activated with autopilot engagement but may be operated independently. This expansion may be added to any package.

 

Century 4000 - The Total Solution

Panel Space 6.35 x 1.5 inches
Weight 17.2 lbs.
Power 4.5 amps @ 14 or 28 VDC
TSO's C4c, C6c, C9c, C52a
Complete Century 4000
The complete Century 4000 is a true 3 axis, flight director/autopilot. Its advanced design provides the smoothest, most precise ride possible. The flexible design provides the economy of expandability.

 



Century 4000 Packages
AK ( ) Kit is priced complete with all necessary installation hardware, brackets, and manufactured electrical cable harness.

KitsDescriptionSuggested List Price
C4000 Trim PrompterC4000 2 Axis Autopilot system  (no gyros)    CALL
C4000 AutotrimC4000 2 Axis Autopilot system with autotrim  (no gyros)    CALL
Instruments
Artificial Horizon
52D267MSquare 3-ATI Lighted Artificial A/H (SIGMA TEK) 1yr warranty CALL
94A578552C77-4, Single Que Flight Director Steering Horizon, 3-ATI Lighted CALL
Directional Gyro
52D254MSquare 3-ATI Lighted Directional Gyro CALL
Heading Situation Indicators
NSD360A-15Square, 3-ATI Lighted, non-slaved, vacuum  CALL
NSD360A-26Square, 3-ATI Lighted, slaved, vacuum  CALL
NSD360A-35Square, 3-ATI Lighted, slaved with RMI bootstrap, vacuum  CALL
NSD1000-26Square, 3-ATI Lighted, slaved, electric 14 or 28V  CALL
NSD1000-35Square, 3-ATI Lighted, slaved with RMI bootstrap, electric 14 or 28V  CALL
Options
YK ( )Yaw Damper. See STC List. CALL
Digital Altitude Preselect1D960 (DAP Kit) CALL
Expansion Kits
Trim Expansion40300 (14)V, 41300 (28V) CALL
F/D Expansion40310 (14V), 41310 (28V) CALL
Miscellaneous
92S8VOR/LOC Converter Kit for use with NSD when radio receivers do not have built-in OMNI converter or nav flag output. Uses converter P/N 1C707-1.  CALL
92S791C930, Adapter required for use with KCS55A Compass System.  CALL
 92S969  1D969, 400Hz ADI/HSI adapter box for 200 mv/deg error.  CALL
 92S969-1 1D969-1, 400Hz ADI/HSI adapter box for 60 mv/deg error.  CALL
 92S929-2  1B929-2, Century ARINC heading interface box for KPI 552/553.  CALL